Ion Selective SensorsTL-CU-406

Copper Ion Sensor

Copper Ion Sensor — TL-CU-406
Ion Selective Sensors

Copper Ion Sensor

TL-CU-406

PVC membrane ISE copper ion sensor. Range 0–1000 mg/L, IP68, RS485 + 4-20mA output.

Request a Quote

Product Overview

The TL-CU-406 uses PVC membrane ISE technology to measure copper ion (Cu²⁺) concentration in water. Used for industrial effluent compliance, electroplating wastewater monitoring, and drinking water quality control.

Working Principle

The sensor uses a continuous online measurement principle with automatic temperature compensation. The measurement signal is processed by an integrated microprocessor and transmitted via RS485 Modbus RTU for direct integration with PLCs, data loggers, and SCADA systems. The 4–20 mA analog output provides compatibility with legacy control systems.

Wiring & Signal Output

Power supply: 12–24 V DC (standard); 220 V AC with adapter
Primary output: RS485 Modbus RTU (address configurable 1–247)
Analog output: 4–20 mA (proportional to measured value)
Relay output: 2 × SPDT relay for alarm / dosing control
Communication: Modbus RTU function codes 03 / 06 / 16
Cable entry: M16 cable gland, IP68 submersible cable available

Technical Specifications

ParameterValue
Measurement PrinciplePVC membrane ISE
Measuring Range0–100.0 mg/L / 0–1000.0 mg/L
Accuracy±10% FS or ±1 mg/L
Resolution0.1 mg/L or 0.01 mg/L
Working Conditions0–40°C, 0–1 Bar
Power Supply12–24 VDC
Connection3/4" NPT Thread
Signal OutputRS485 Modbus RTU or 4-20mA
Calibration2-point calibration
ProtectionIP68
Cable Length5m
pH Limit4–10 pH

Key Features

  • PVC membrane ISE for Cu²⁺ measurement
  • Two range options for different applications
  • Suitable for electroplating wastewater
  • Continuous online monitoring

Typical Applications

Industrial effluent complianceElectroplating wastewaterDrinking water qualityMining wastewater

Need technical support or a custom specification?

Our team responds within one business day.

Send Inquiry